Full Reagent Test Kit


Discreet packaging.

SAME DAY shipping for all purchases before 22:00 GMT.

  • 1x 12-spot ceramic spotting plate
  • 2 Gloves, 1 micro spatula
  • Instructions for use.
  • Acid neutralizer (baking soda)
SKU: N/A Category:


By purchasing the Full Reagent Test Kit you support our fight for drug policy based on harm reduction, human rights, and facts, not prejudice.


Full Reagent Test Kit comes with 11 reagents for over 550 substances, including 2C-B, benzofurans, meth/amphetamine, LSD, DMT, dissociatives, MDMA, MDA, mephedrone, and opioids. It is used to rule out U-47700, NBOMe, PMA/PMMA and other, less predictable and less desirable, highly toxic dangerous drugs. Multiple reagents are required to detect adulterants and increase analysis precision. Included 11 reagents are: Marquis, Mecke, Mandelin, Liebermann, Froehde, Ehrlich, Hofmann, Robadope, Simon’s, Scott, Zimmermann.

Full Reagent Test Kit instructions and apps feature over 550 substances. Every bottle contains 5 or 10 ml, with each 1 drop accounting for 1 use, 100-200 total. High-quality HDPE and brown amber glass bottles protect reagents from light and moisture to ensure prolonged shelf life. Special dropper guarantees 0 spills. For extra-stealth ask us in the checkout notes to remove substance-related stickers and fliers.

NOTE: Reagents deteriorate with time, especially if exposed to sunlight or not refrigerated. If you are uncertain whether a reagent will work, test it with a previously checked sample.


NOTE: Full Reagent Test Kit can only test the PRESENCE, not PURITY or QUANTITY of a specific substance.
Always test under a strong light and using the smallest possible sample. Never open more than 1 bottle at once, if you make a mistake you might contaminate the reagents and spoil them. If a few reactions are happening at once, only the darkest one of them will be visible. To detect adulterants, try using on fresh samples secondary reagent tests like Robadope, Simon’s, Scott or Zimmermann. If you don’t know yet how to use a reagent test kit, see the following instructions:

  1. On a clean ceramic surface (e.g. bottom of a mug or a plate) prepare a sample no bigger than this size -> ●
  2. Carefully not to touch the sample with the bottle, remove the cap, twist the bottle upside-down and wait for 1 drop to fall. Replace the cap. Repeat with part B for Robadope and Simon’s (or Zimmermann).
  3. Immediately observe the color change and compare it with a supplied color chart. No reaction within the first 30 seconds or unexpected results indicate the sample doesn’t contain the expected substance or is adulterated.
  4. Neutralize the reaction with baking soda (optional) and flush in a sink under running water for a few minutes.

No reaction can be caused by caffeine and other substances (or lack of active ingredient).


Reagents consist mostly of concentrated acid and are strong enough to burn skin and clothing. Keep out of eyes and mouth. Keep away from children. Always use in a well-ventilated area. Wear gloves (supplied) when handling the bottle and cap. Wear protective eyewear. Never point towards face etc. If you get some on you/clothing, then immediately wash with soap and water. Wash testing surfaces with soap and water as well. Dispose of any unwanted reagent down the sink with running water and baking soda (supplied), ventilate. Store all testing kits away from any heat in a cool, dark place between uses. The average shelf life of 1 year can be significantly extended by storing in a freezer (warm to room temperature before use).

A positive or negative reaction for a substance does not indicate if it is safe. No substance is 100% safe.

Additional information

Bottle Sizes

5ml (~100 tests), 10ml (~200 tests), Refill 5ml (No Kit), Refill 10ml (No Kit)


There are no reviews yet.

Be the first to review “Full Reagent Test Kit”

Your email address will not be published. Required fields are marked *